Automatic Polarimeter

• TempTrol - Electronic cooling and heating from 15o-30oC

• 21CFR Part 11 Compliance: Electronic signature and secure local data storage

• Six Standard Wavelengths: 365nm, 405nm, 436nm, 546nm, 589nm, 633nm

• Standard Accessories: TempTrol NIST Traceable Quartz Standard, TempTrol 100mm Polarimeter Cell, TempTrol Temperature Validation Cell and Built-In Sample Measurement Probe.

• 3-year domestic warranty and 20-year support guarantee

TempTrol Electronic Temperature Control System

The TempTrol System allows push-button temperature control of your TempTrol 100mm cell, 200mm cell or Quartz Control Plate. Set the temperature, push "measure" and walk away. The Zoom will heat or cool to a predefined temperature and then provide you with the result, all in one easy step.

The TempTrol System will accurately control your sample temperature to within +0.2oC.

Print Format
The AUTOPOL V Polarimeter allows the user to have full control of what information is contained in the printout. Numerous parameters, such as: user identifier, sample and lot identifiers, sample name, tube length, concentration, wavelength, measurement mode, time and date, temperature and statistics can be printed after each measurement or after a group of measurements. This is accomplished by designating the required parameters, via menu entry, during the print format setup mode.

Statistics
AUTOPOL V Polarimeter calculates the mean, the standard deviation and records the minimum and maximum readings for up to 999 measurements. Measured data for statistical calculation can be printed in either of two ways: automatically, at predetermined time intervals, or manually, by pressing the print key. Statistics for a batch of samples can be printed by pressing the page feed key. Statistics on time varying optically active samples can be compiled by measuring a sample at a predetermined rate and for a predetermined number of measurements.